View Full Version : Wheel Tethers

01-28-2008, 10:06 AM
As discussed at the meeting yesterday, wheel tethers will be required to run at Riverhead... Called 600 Racing this morning, they have Wheel Tethers for $60.00 a set...

I'll let you know more once they arrive...

01-28-2008, 10:44 AM
Brian, Just be careful before you put them on. The last time we ran at Riverhead, it was a different tether configuration than 600's set up. It was one tether that ran from side to side and 600's are two separate tethers on each side. I'm not sure if either will be acceptable or if the track will require
one specific set up. If the 600 racing set is the one to use, Oval Speed will surely stock them in very short order. In other words, I would try to get a clarification from the track first.

03-19-2008, 12:00 PM
Oval Speed finally got the picture from 600 racing on the way they attach the tethers to the cars. Hopefully it will be attached to this message.

03-19-2008, 01:16 PM
Tom,my teathers on my car are twice as thick and long as the ones pictured.They also bolt behind the upper a arm bolt after passing through the lower part of front frame.Is this style and mounting method acceptable?:help:

03-19-2008, 02:01 PM
That was an earlier version of the tethers, you should be fine. I have them on my car.

03-19-2008, 04:03 PM
Thanks Tom, anyone going to Mountain Speedway to practice on March 29????:wave: