Was wondering how much gear to run @big diamond?
Thanks
any help is appreciated
wanted to get there this year n try it
running fullsize gm btw
Was wondering how much gear to run @big diamond?
Thanks
any help is appreciated
wanted to get there this year n try it
running fullsize gm btw
depend upon what RPM your motor runs best at. 3.08 for the lowest ratio on up. Tire size also affects this # phil
Guess I should have stated it differently
What I meant was how much total overall gear ratio are guys running up there
Something close to 5.60 ,more ??less??
Most guys wont tell you what gears they use. I will But I use a Pontiac motor. I used 2nd gear turbo 350 with a 3:08 rear = 5:83 . My car won a few races and was always competitive. If You go Chevy motor you will need more gear. phil
Thanks Phil but the gear ratios don't add
up the way you describe them
3.08x 1.52 is only 4.68
Anyway a if you are running a 5;83 thats probably close to what i d expect
Was just trying to see if gview gear was close to big d
Thanks again
hope see you in few weeks
Damn your right I must have used obama math. But I do use a 3;08 in 2nd gear. You would want more gear for Gview then BD. phil
do they rent transponders and how much?
Kmw, hope to see you at Big Diamond for enduro #2 coming up on Saturday May 4th. Race time is 3pm. Remember to stop by and say hello to your announcer
Gary Lileck
Thanks gary
will do,big diamond is definitely on my list of tracks to visit and try this year
i m driving the #222 car.and i ll be sure and stop by
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks